Axial 1/24 SCX24 Deadbolt 4 Wheel Drive Rock Crawler Brushed RTR

Description

The SCX24 Deadbolt 4WD is the first Axial off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on outdoor OR indoor adventures - offering factory-assembled ease, scale looks, and confident handling on any trail.
Horizon Hobby
Axial 1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR, Red, AXI90081T1
Features
Includes 3 channel radio system, ESC and transmitter batteries
Includes motor and on-board LiPo battery
Realistic narrow-stance rock crawler body in olive green or red
Molded roll cage with realistic light bar
Realistic driver figure and many other scale details
Officially licensed KMC XD229 Machete Crawl wheels
Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread)
Full-time 4WD
Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
Steel front and rear axles, front stub axles and dogbones provide strength and durability
Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
Front and rear axles consist of a two-piece, molded plastic solid axle design
3-Link front and 4-link rear suspension supply optimal handling
Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist
Two LEDs in the front bumper for night driving
Overview
The SCX24™ Deadbolt™ 4WD is the first Axial
®
off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.
Even new modelers driving the SCX24 chassis will be well-equipped to tackle tough climbs and rough trails. Like the larger SCX10™ II chassis, this smaller version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.
For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces torque twist.
Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. Check out that Deadbolt body — with its narrow stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you'll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.
Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 3-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite
®
88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!
STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ II platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.
DYNAMITE
®
88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It's mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.
WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.
SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you've known and expect from Axial.
FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
LED LIGHTS INCLUDED
Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We've also included extra suspension links for adjusting your wheelbase length.
KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale.
The officially licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still retaining excellent composure for on-road use.
HINGED BODY SYSTEM
The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just two body clips and swinging the body up.
FULL BALL BEARINGS
Just because the SCX24™ is smaller in size doesn't mean the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.
Item Condition
All items sold by Horizon Hobby are sold as "New: A brand-new, unused, unopened, undamaged item." We do not sell used, opened, or damaged items.
If an item is damaged during shipping, please see our Returns section to arrange a return.
Shipping
Returns
About Horizon
Contact Us
Shipping
Horizon Hobby ships to all 50 States as well as Puerto Rico, Virgin Islands, and other US protectorates.
Unfortunately, we cannot ship to APO/FPO or PO Box addresses at this time.
Some restrictions apply based on destination and item size.
Our
FREE
shipping and combined shipping discounts save you money. We offer
FREE
ground shipping on US orders of or more! Only .99 or .99 for ground service on US orders under . We also offer expedited shipping.
We cannot combine shipping on multiple orders.
You will also receive
free shipping
on all orders over

with a discount applied in the eBay shopping cart (applies to contiguous US orders only).
We ship out of our two warehouses in the United States located in Illinois and California. We will ship your order from the closest warehouse with inventory. Shipping times may vary based on shipping location.
ORM-D and Lithium / Li-Po Battery Restrictions
ORM-D items can only be shipped via ground delivery. Products of this nature include quarts of fuel, glues, paints, thinners, aerosol sprays, and certain lithium batteries. We cannot ship ORM-D items to Alaska, Hawaii, Puerto Rico, or other US Protectorates. Other restrictions may apply based on APO/FPO shipping rules.
Payment
We accept all major credit cards, PayPal, and Google Pay.
Taxes may be applicable at checkout.
Learn More
Returns
Returned merchandise must be in unused condition and in its original packaging. The mounting of engines and accessories, running fuel through engines, cutting or pushing out the balsa sheets in kits, and other similar actions constitutes used merchandise. Radios must be returned with unmounted servos and switch harness.
We do not accept returns on Lithium-based batteries sold separate from a kit (i.e.: standalone) or Nickel or Alkaline batteries which have been opened, used and / or charged, due to an abundance of caution and care for our customers. Shipping conditions and parameters for batteries are particularly sensitive.
Flammable or combustible materials or products (regardless of whether the item is open or unopened) such as: Nitro engines (if fuel has entered the engine), Nitro fuel, Unopened as well as opened, charged and / or used Lithium Ion / Polymer (LiPo) batteries and other Lithium-based batteries. Any type of opened, charged and / or used battery including LiPo, Nickel-Metal Hydride (NiMH), Nickel-Cadmium (NiCd), other Nickel-based batteries and / or Alkaline-based batteries. Sealed Lead Acid batteries. Paints, thinners, certain glues or cements/pastes. Aerosols or compressed gas canisters. Rockets, kits containing rockets with or without igniters, igniters, hobby fuel (both quart or gallon).
When packing your order for return, please be sure all the original packing material and instruction papers and/or manuals are included. We will be unable to process your return if parts are missing, or if items are not packed properly to avoid damage to products and their boxes and/or packages. ARF kits are specially packaged to insure safe shipping of all contents. In order to receive credit for a returned ARF, the contents must be returned in the original plastic covers and arranged in a manner that will not damage the contents or packaging.
Please contact us for a return authorization number by opening a return case on Ebay. Freight charges will not be refunded. The customer is responsible for insured shipping back to our shop.
Returns sent COD will not be accepted.
Horizon Hobby reserves the right to charge a 15% restocking fee on any merchandise returned for credit.
About Horizon Hobby
Providing an exceptional customer experience is a mission we take seriously. That's why, when it comes to radio control (RC) fun, we don't toy around. Our advances in model aircraft and vehicle stabilization, 2.4GHz control and ready-to-run convenience have made RC hobbies more exciting and more accessible than ever before.
More importantly, we love RC just as much as our customers do. That's why we don't buy off-the-shelf product and slap our name on it. Any product that bears the Horizon Hobby name was developed by a team of in-house experts, many of whom have decades of experience in the hobby.
But our commitment to a great experience doesn't stop at the drawing board. Every Horizon Hobby product is backed by the best customer service you will find in any industry. Customer phone support, warranty repairs, online resources – we do it all and with the same passion for excellence we started with back in 1985.
Horizon employs nearly 700 people and sells products in more than 100 countries around the world. Corporate headquarters, along with the main distribution facility and product service center, are located in Champaign, Illinois. Additional distribution centers are located in Ontario, California and Barsbüttel, Germany (site of Horizon Hobby GmbH). California is also home to the Losi RC car division (Ontario) and the Athearn train line in Long Beach.
At Horizon Hobby, we help people have fun with hobbies. Providing an exceptional customer experience is a mission we take seriously. That's why, when it comes to radio control fun, we don't mess around.
Please contact us through your original purchase on eBay. We're always striving to answer e-mails as quickly as possible.