-40%
6FT 72
6FT 72
6FT 72
6FT 72
6FT 72
6FT 72
6FT 72
6FT 72

6FT 72" Silk Screen Printing Squeegee Blade - 60 DURO - Polyurethane Rubber RED

$ 14.96

Availability: 15 in stock
  • Item Code: SPM-HY-SSB60-6FT-US
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Condition: New
  • Refund will be given as: Money Back
  • MPN: 6593002672400
  • Item must be returned within: 60 Days
  • Brand: CALCA

    Description

    6FT - 72" Silk
    Screen Printing Squeegee
    Blade - 60 DURO - Polyurethane Rubber
    Free Shipping for USA Customers
    Door to Door Service
    FAST shipping in 24h on working days
    High Quality, low cost
    Squeegee durometer is the squeegee "hardness" that determines the amount of pressure required to push ink through mesh. In general, soft
    Squeegees
    leave a thicker ink deposit, while hard squeegees deposit a thinner amount.
    What durometer should you use?
    60 durometer is the softest and leaves a minimal ink deposit, its great for very thin ink and water based inks.
    70 durometer is by far the most popular an versitile in the garment industry; it's a great general purpose blade for just about everything.
    80 durometer provides a stronger force and larger deposit for thick opaque inks.
    70/90/70 triple durometer gives you a soft edge with a hard center for optimal control.
    Maintenance:
    Achieving the best screen printing performance and productivity is greatly dependent on the selection of the correct squeegee for the application and proper squeegee maintenance. When printing, monitor production time and rotate squeegees frequently. (The necessary rotation frequency is dependent on the ink / solvent system involved in the application) By doing so, you will achieve a more uniform print quality and increase the life of your squeegees. A squeegee should always be wiped clean and dry following removal from the press and stored in a dry environment at room temperature. The blade should be allowed to recover from the ink and solvent attack and rest for a period of 24 hours. It can then be placed back into production, or if necessary re-sharpened and placed back into production.
    Storage:
    Polyurethane Squeegees should always be stored flat in a dry (50% Relative Humidity) environment at room temperature. (approximately 60-70 degrees F) Storage at temperatures below 60 degrees F may show an increase in durometer. This increase has no influence on the physical properties or the performance of the polyurethane. Under these storage conditions. Older squeegees often show increased printing performance.
    Package:
    Packing Size : 24.5 x 24 x 5.5 cm
    Gross Weight: 1.07 kg