1/2/3/4 Gang Smart Home WiFi Light Switch Wall Touch Panel For Alexa Google

Description

NOTE:
This switch is Netural Line required design. Before you buy, please confirm if your House has Netural Line for this Switch.
Specification: Type: 1/2/2/4 Gang Touch Wi-Fi Switch (US Standard) APP: Smart Life Material: PC V0 fireproof + tempered glass panel Rated Voltage: AC 110V-240V(US) Max Load : 600W/Gang Max. Current: 10A Wi-Fi: 2.4GHz, IEEE 802.11 b/g/n Support by : IOS/Android Wireless Power Consumption: <0.3W Power Supply: Neutral and Live wire Security mechanism: WPA-PSK/WPA2-PSK Feature: A)No Hub required for set up: At anytime anywhere Immediately start controlling your Switch with quick and easy set up using wifi on your compatible Apple iOS device with the Apple Home App, B)Voice Control with Siri: Control your lights with voice integration through Siri Ask Siri to turn on or off, and more. C) It works with Apple HomeKit, so you can easily control connected Switch using Siri on your iPhone, iPad, iPod touch, or Apple Watch. No require to install others APP. E)The intelligent timer switch will automatically turn on after setting a timer for this switch, which is essential for daily scheduling, and bring you a comfortable and intelligent lifestyle Tips--App Be sure that you are using 2.4GHz WiFi when connecting with the smart bulb. And WiFi must be detectable status. Many routers have 5 GHz and 2.4 GHz network and your phone will always automatically connect to the 5 GHz network. So, you have to completely turn off your 5 GHz network by going to your router settings (enter the router IP address into your internet browser, usually something like 192.168.1.1), forcing your phone to connect to the 2.4 GHz network.
How to install Homekit Switch to you Apple Home App
Power on the device and use your compurter or phone search the WiFi until find Homekit_xxxxx and click to connect, wait several seconds until configuation page pop up. After you connect it, the configuration web will pop up automatically ( If not, please use your web browser visit IP address: 192.168.4.1 , then choose the WiFi router you want to connect (make sure connect to 2.4G not 5.8G)
Choose your router and input the password, then save
Open Apple Home APP and click + to add accessory, scan the code or choose" I Don't Have a Code or Cannot Scan" to install manually
While Home app find the device click it then press Add Anyway
The device has been successfully installed
Touble Shooting
If add unsuccessfully, press and hold the key more than 8 seconds to reset it. Then try again until success